top of page

Professional Group

Public·31 members

Battery Ee Prom Works Cracker ##BEST##

ok im a novice user but i found the best solution for toshiba laptops with bios password set (and lost obiosly) what i did was remove the cmos battery and let it reset until it ask for the date and time again but very important step when the promp ask you reset defaults or or enter setup do alt ctrl delete and boot using a usb floppy drive with a windows 98 floppy and bingo good to go hope this information helps anyone out there with the same problem mssage me for any questions crazy thing is i tried everything hex floppy and parralel key all failed ..

Battery Ee Prom Works Cracker

rj713 the laptop is locked up by a password. This person can not get beyond the password screen. They are not trying to get to the BIOS. "They want to own the box." That is what I was trying to clarify with my question in the comment section, of their question. I have no solutions for what they want the manufacturers keep coming up with new ways of making sure that who owns the laptop is not compromised. SAM inside works for the operating system.

You cant reset the bios password Of the Toshiba laptop just by removing cmos battery you need to reset the contents of the flash eeprom that stores several values like the password, serial number, MAC adress, OEM numbers.

My company provided laptop for me HP 9480M. It was locked under company. I decided remove all encryption. CMOS clear and battery remove does not works. I contacted to HP Technical developer team. They provided master password based on serial number. of my laptop. It help me reset password and reset TPM module. So now i have clean HP laptop without any password.

Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's our lowest-cost arduino-IDE programmable board!The Attiny85 is a fun processor because despite being so small, it has 8K of flash, and 5 I/O pins, including analog inputs and PWM 'analog' outputs. We designed a USB bootloader so you can plug it into any computer and reprogram it over a USB port just like an Arduino. In fact we even made some simple modifications to the Arduino IDE so that it works like a mini-Arduino board. You can't stack a big shield on it but for many small & simple projects the Trinket will be your go-to platform.This is the 5V Trinket. There are two versions of the Trinket. One is 3V and one is 5V. Both work the same, but have different operating logic voltages. Use the 3V one to interface with sensors and devices that need 3V logic, or when you want to power it off of a LiPo battery. The 3V version should only run at 8 MHz. Use the 5V one for sensors and components that can use or require 5V logic. The 5V version can run at 8 MHz or at 16MHz by setting the software-set clock frequency.Even though you can program Trinket using the Arduino IDE, it's not a fully 100% Arduino-compatible. There are some things you trade off for such a small and low cost microcontroller!


Welcome to the group! You can connect with other members, ge...
Group Page: Groups_SingleGroup
bottom of page